Creo Update Seminar - Perth
2024-07-30 12:30 - 16:30 (Australia/Perth) | The Hub, Bentley Technology Park, Perth, The HUB - Building, 2 Brodie-Hall Dr, Bentley, Western Australia, 6102, Australia
Creo 11 is here with a wide range of enhancements across multiple areas. LEAP is taking Creo 11 on the road with live, in-person launch events planned for many capital cities across Australia.
This year’s seminars will include general best practices sessions for Creo and Windchill above and beyond our usual what’s new sessions.
Join us at these free afternoon events to see:

latest new features and enhancements in Creo 11 and Creo+,
best practices for Creo and Windchill,
plus hear stories from Creo customers.

Lunch and Refreshments will be provided and places are limited, so please register your attendance early by completing the form below:

Creo Update Seminar - Adelaide
2024-08-01 12:30 - 16:30 (Australia/Adelaide) | Hindmarsh, Adelaide, SA, South Australia, 5007

Creo Update Seminar - Melbourne
2024-08-05 12:30 - 16:30 (Australia/Melbourne) | Monash University, Clayton Campus – Melbourne, Australia

Creo Update Seminar - Christchurch
2024-08-07 12:30 - 16:30 (Pacific/Auckland) | TBD
Creo 11 is here with a wide range of enhancements across multiple areas. LEAP is taking Creo 11 on the road with live, in-person launch events planned for many capital cities across Australia and New Zealand.
This year’s seminars will include general best practices sessions for Creo and Windchill above and beyond our usual what’s new sessions.
Join us at these free afternoon events to see:

latest new features and enhancements in Creo 11 and Creo+,
best practices for Creo and Windchill,
plus hear stories from Creo customers.

Lunch and Refreshments will be provided and places are limited, so please register your attendance early by completing the form below:

Creo Update Seminar - Auckland
2024-08-08 12:30 - 16:30 (Pacific/Auckland) | Waipuna Conference Centre, 58 Waipuna Road, Mount Wellington, Auckland, 1060, New Zealand

Webinar: Rocky DEM for Transfer Chutes, Conveyors and Bulk Materials Handling
2024-09-10 11:00 - 23:40 (Australia/Melbourne) | Online
Ansys Rocky DEM is the go-to tool for accurately simulating the performance of bulk materials handling systems.
Join us for this webinar to learn how Rocky DEM is helping engineers and equipment designers around Australia to easily troubleshoot existing issues and optimise their designs to:

avoid chute blockages due to wet / cohesive materials,
improve longevity of wear liners,
better configure chute flow to reduce belt misalignment and tracking issues.

LEAP’s DEM experts will demonstrate how Rocky DEM simulations help you assess the overall performance of your bulk materials handling system, identify problem areas and setup virtual tests for geometry/operational parameters to identify weak points in the system.
Click below to register now:
Register

Land Forces 2024
2024-09-11 - 2024-09-13 | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
LEAP is excited to be exhibiting at the Land Forces 2024 International Land Defence Exposition, the premier platform for interaction between defence, industry and government of all levels, to meet, do business and discuss the opportunities and challenges facing the global land defence markets.
The exposition will present:

A comprehensive international industry exhibition
Three day conference program from leading convenors and industry experts
Daily networking events and functions
Innovation Awards
Formal business-to-business and business-to-delegation engagement programs

Visit LEAP at stand C135 (pod 17) to see the the latest in simulation and digital transformation technology!
Register here: https://landforces.com.au/registration/

Bulk Expo 2024
2024-09-18 - 2024-09-19 | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
LEAP is excited to be back exhibiting at the Australian Bulk Handling Expo (BULK) which returns to Melbourne in September 2024, connecting people to people and business to business, while showcasing solutions that will help the bulk solids handling industry move their products to where they are needed most – both domestically and internationally. The event will feature an expansive trade show, showcasing the latest solutions for the industry, as well as hosting an informative two-day conference discussing how businesses can take the next step to remain cutting-edge in a constantly changing world.

BULK2024 will be held from 10am–5pm, 18–19 September 2024 at the Melbourne Convention and Exhibition Centre.

Register here: https://www.bulkhandlingexpo.com.au/

LEAP/Ansys Student Team Simulation Summit 2024
2024-10-01 10:30 - 2024-10-02 16:00 (Australia/Melbourne) | Online
LEAP is excited to announce our inaugural Ansys Student Team Simulation Summit 2024 which will run online across October 1st & 2nd, 2024. This virtual summit is designed specifically for student teams across Australia and New Zealand who are using Ansys simulations in team competitions such as Formula SAE, rocketry, uncrewed aerial vehicles, lunar rovers, solar cars, human powered vehicles and more. The summit will include best-practice sessions on key applications such as structural mechanics, aerodynamics (incl. both high-speed and low-speed), lightweighting, composites, electromagnetics, particle simulation and materials selection. We will also encourage representatives from student teams to share stories of their recent simulation work and future plans.

Summit Highlights will include: Expert Presentations: Learn from LEAP’s experts on simulation techniques and industry best practices.Team Presentations: Hear from other student teams about their experiences and solutions using simulation across specific disciplines.Networking Opportunities: Connect with peers to share knowledge and expand your network.

Call for speakers: Presentation slots are still available – if you would like to present some highlights from your work, please tick the box when you register.Please share this invitation with relevant members of your team to make sure they are aware of this event. Each day will be run across virtual sessions between 10:30am and 4:00pm with breaks for lunch etc. The full schedule will be made available to registrants closer to the event.

Register Below

Ansys User Group 2024 - Perth
2024-10-03 08:30 - 16:30 (Australia/Perth) | The Hub, Bentley Technology Park, Perth, The HUB - Building, 2 Brodie-Hall Dr, Bentley, Western Australia, 6102, Australia
We invite you to network with your local Engineering/Simulation community and learn more about the work of local Ansys users at our Ansys User Group Meeting on Thursday October 3rd in Perth. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, DEM and Systems/Digital Twins.

Call for speakers: Speaking slots are still available – if you have some interesting work you’d like to share with your peers, complete the form to register and let us know. The day will be run across two separate sessions with FEA in the morning and CFD/DEM after lunch, plus drinks & networking into the afternoon. Both sessions will include an update on what’s new in Ansys 2024 from LEAP’s Ansys team.

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries in WA and network with prominent local engineers and Ansys users.

Register Below

Ansys User Group 2024 - Live Stream
2024-10-03 11:00 - 17:00 (Australia/Melbourne) | Online
We invite you to join us online to learn more about the work of local Ansys users at our Ansys User Group Meeting on Thursday October 3rd. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, DEM and Systems/Digital Twins.

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries and catch up on the best highlights of recent Ansys releases.

Register Below

Webinar: Advanced Features of Ansys Rocky DEM for Next-Level Simulation
2024-10-16 13:00 - 13:40 (Australia/Melbourne) | Online
Join us for an exclusive webinar where we dive deep into the cutting-edge capabilities of Ansys Rocky DEM! Designed for engineers and simulation experts, this session will showcase how advanced features like OptiSLang integration, robust API capabilities, and Multi-GPU acceleration can transform your simulation experience.
Discover how to streamline your workflows, enhance your model precision, and dramatically reduce simulation times. Whether you’re tackling complex particle interactions or optimising your designs, this webinar will equip you with the tools to elevate your projects and drive innovation.
What to Expect:

Live Demonstrations: See Rocky DEM’s advanced features in action.
Expert Insights: Hear from Ansys specialists about best practices and tips for maximizing performance.
Interactive Q&A: Get your questions answered in real-time by our team.

Don’t miss this opportunity to unlock the full potential of your simulations! Register now to secure your spot and take the first step toward revolutionising your engineering processes.
Click below to register now:
Register

Webinar: Managing Simplified Representations in Creo Parametric
2024-11-14 13:00 - 14:00 (Australia/Melbourne) | Online
Managing large assemblies in CAD can be challenging, often affecting system performance and hindering your design process. If you’re looking to boost your efficiency and streamline your workflow in Creo Parametric, our upcoming webinar is tailor-made for you.
Join us to explore the power of Simplified Representations in Creo Parametric and transform how you work with large assemblies.
What You’ll Learn:

Efficient Assembly Retrieval: Discover strategies to quickly open and retrieve large assemblies in Creo, minimizing wait times and enhancing your productivity.
Simplified Representation Tools: Dive into the tools and techniques that Creo offers for simplifying assemblies. Learn how to maintain the integrity and intent of your design while increasing your work efficiency.
Boosting System Performance: Uncover methods to significantly improve your system’s performance when working with large assemblies, ensuring smoother and faster design iterations.

Why Attend?
This webinar will not only provide you with the knowledge to efficiently manage large assemblies in Creo Parametric but also equip you with practical skills to enhance your design process. Through live demonstrations and expert tips, you’ll learn how to leverage simplified representations to their fullest potential, leading to a more productive and less frustrating CAD experience.
Don’t let large assemblies slow you down. Join us to unlock new levels of efficiency and performance in your design projects.
Click below to register now:
Register

Online Training - Ansys Mechanical: Linear Dynamics (Part 2)
2024-11-20 14:00 - 16:00 (Australia/Melbourne) | Online
During these sessions, the presenter will cover theoretical concepts and FEA workflows. Additionally, participants will have the opportunity to engage in tutorials at their convenience to apply what they’ve learned and practice. For more information contact your Ansys account manager or complete this form and one of our Ansys team members will contact you to discuss your needs.

Topics covered include:

Damping
Modal Analysis
Cyclic Symmetry
Linear Perturbation
Harmonic Analysis
Response Spectrum
Random vibration
Transient Analysis
Component Mode Synthesis (CMS)

Webinar: Reduce Errors & Save Time on Every Engineering Calculation
2024-11-28 13:00 - 13:30 (Australia/Melbourne) | Online
In today’s complex engineering landscape, even small calculation errors can lead to significant setbacks. Join us for this free webinar to learn how you can streamline your engineering calculations and boost accuracy across projects by minimising errors, ultimately reducing costs and saving valuable time.
During this session we’ll dive into the common pain points in engineering math, from repetitive calculations to complex equation management. We’ll discuss practical strategies to improve accuracy, reduce calculation time and improve workflow efficiency, allowing you to focus on what truly matters—innovation and results.

Webinar: Simulation Driven Design
2025-01-16 13:00 - 13:30 (Australia/Melbourne) | Online
You know that speed-to-market is crucial to a successful product launch. Learn how adding real-time simulation tools to the beginning of your development workflow will give your engineers instant feedback on their design changes and provide valuable insights on which design directions to explore next, in turn reducing rework and shortening your development cycle. Join this webinar to learn more.
Register

Australian Microwave Symposium (AMS) 2025
2025-02-10 09:00 - 2025-02-11 17:00 UTC | Griffith University, 1 Parklands Drive, Southport, QLD, 4215, Australia
LEAP is proud to be a Platinum Sponsor of the 6th Australian Microwave Symposium (AMS), which will take place on February 10-11, 2025, in Gold Coast, QLD. This biennial conference brings together the national and international microwave, millimetre-wave, and terahertz communities to meet and showcase their latest analytical, numerical, and experimental achievements in microwave and RF components, circuits, systems, antennas, and propagation. Visit the AMS website for more information and to register.

Webinar: Solving Circular References in Creo Parametric
2025-02-13 13:00 - 14:00 (Australia/Melbourne) | Online
Circular references in Creo Parametric can be a thorn in the side of even the most experienced designers, leading to frustrating errors and significantly slowing down the design process. If you’re seeking to enhance your productivity and streamline your workflows by mastering circular references, our upcoming webinar is the perfect opportunity.
What You’ll Gain:

In-Depth Understanding: Learn the ins and outs of circular references – what they are, how they occur, and the impact they have on your projects.
Efficient Investigation Techniques: Discover various methods to quickly and effectively investigate circular references within your designs, saving you time and headaches.
Practical Tools and Solutions: Get hands-on with the Reference Viewer in Creo Parametric to identify problematic references. Learn how to navigate through parents and children in your assembly, identify external references, and ultimately break dependencies with confidence.
Boosted Productivity: By eliminating circular references, you’ll significantly reduce retrieval and regeneration times, speeding up your overall design process and increasing productivity.

Why Attend?
This webinar is more than just a troubleshooting session. It’s a transformative learning experience designed to empower you with the knowledge and skills to tackle one of the most common and challenging issues in parametric modelling. Through live demonstrations and expert guidance, you’ll learn how to maintain the integrity and efficiency of your designs in Creo Parametric.
Don’t let circular references slow you down. Reserve your spot today and take a significant step towards smoother, more efficient design workflows.
Click below to register now:
Register

Webinar: Unlock the Power of Top-Down Design in Creo Parametric
2025-03-06 13:00 - 14:00 (Australia/Melbourne) | Online
Are you looking to streamline your product development process with advanced Top-Down design techniques in Creo Parametric? Whether you’re tackling complex assemblies or collaborating across teams, our upcoming webinar is designed to elevate your skills and transform your approach to design.
What You’ll Discover:

Efficient Planning Strategies: Learn how to effectively plan your assemblies with proper structure, naming conventions, and modularity requirements, ensuring a solid foundation for your designs right from the start.
Top-Down Design Execution: Gain insights into controlling your product design from the top level within Creo and discover how to distribute design tasks among groups and vendors for maximum efficiency.
Concurrent Design and Verification: Explore how Creo enables a controlled design environment, allowing for concurrent work and verification, so you can make seamless adjustments as your project evolves.
Avoiding Common Pitfalls: Understand how to create assemblies that follow your specific design intent, avoiding circular references, and ensuring a smooth, error-free design process.
Real-World Applications: See Top-Down design in action through live demonstrations in Creo Parametric, showcasing how to apply these techniques to your projects for better, faster, and more flexible designs.

Why Attend?
This webinar is more than just a tutorial – it’s a gateway to mastering Top-Down design in one of the most powerful CAD tools available. By the end of our session, you’ll be equipped with the knowledge and skills to apply these techniques directly to your work, leading to improved design quality, reduced time to market, and enhanced collaboration across your team.
Click below to register now:
Register

21st Australian International Aerospace Congress
2025-03-24 09:00 - 2025-03-26 17:00 (Australia/Melbourne) | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
Returning to Melbourne in 2025, the 21st Australian International Aerospace Congress (AIAC21) is the region’s preeminent aerospace forum. Held alongside the Australian International Airshow in Avalon, it’s a deep dive into the latest aerospace and space technologies and research over several flight-filled days. Join leap on the 24-26 March at Melbourne Convention & Exhibition Centre and Avalon – visit Engineers Australia for more information.

Avalon Australian International Airshow 2025
2025-03-25 10:00 - 2025-03-28 17:00 (Australia/Melbourne) | Avalon Airport, 80 Beach Rd, Lara, VIC, 3212, Australia
LEAP is excited to be part of the 2025 Avalon Australian International Airshow which will be held at Avalon Airport from 25th-30th of March. For more information and to register for the show, click here.
LEAP will be exhibiting at the show, with the PTC team located at the Victorian Government Pavilion in Hall 1 and the LEAP Ansys team on the Ansys booth in hall 2. If you would like to arrange a meeting with LEAP, please complete the relevant form indicating your preferred time/s and we will do our best to accommodate you.

Webinar: Understanding and Managing Design Intent with Creo Reference Viewer
2025-04-03 13:00 - 13:45 (Australia/Melbourne) | Online
Join us for a detailed webinar on leveraging Creo Reference Viewer to gain deeper insights into design intent. We’ll explore key tools like the Design Tree and Evolution Tree, helping you visualize dependencies, track design changes, and streamline your workflow. Whether you’re troubleshooting references or refining your design process, this session will provide practical strategies to enhance efficiency and clarity in your CAD models.
Click below to register now:
Register

Australian Manufacturing Week
2025-05-06 10:00 - 2025-05-09 16:00 (Australia/Sydney) | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
LEAP is exhibiting at Australian Manufacturing Week from May 6th to 9th at the Melbourne Convention & Exhibition Centre in Melbourne. Find us at booth MS460 to meet the LEAP team and discuss all your engineering and product development software needs. Register to attend here.
If you would like to arrange a time to meet with the LEAP team to discuss your needs, please complete the form below.

SouthMACH 2025
2025-05-28 08:00 - 2025-05-29 17:00 (Pacific/Auckland) | Christchurch Arena, 55 Jack Hinton Dr, Addington, Christchurch, 8024, New Zealand
Elevate your manufacturing and engineering business with products, trends and knowledge at SouthMACH
SouthMACH is the South Island’s leading industry trade event, spotlighting the latest developments in manufacturing, engineering and technology. Access big developments in new brands and product launches, essential education and industry insights, crucial networking, and serious deal-making. It’s all here waiting to be experienced.
Register to attend today.
If you would like to arrange a time to meet with the LEAP team to discuss your needs, please complete the form below.

3-Day Creo Fundamentals Training (Perth)
2025-06-17 09:00 - 2025-06-19 17:00 (Australia/Perth) | LEAP Perth Office, Suite 6, 5 Brodie-Hall Drive, Bentley, WA, 6102, Australia
In this course, you will gain a baseline knowledge of Creo’s core capabilities. You will learn the Creo Design Process that is used to create part and assembly models as well as document and analyse them. You will then take a deeper dive into each of the Creo Design Process sections.
Pay for this course online by credit card, or email info@leapaust.com.au for alternative payment options.

Webinar: Drawing Formats, Templates, and Best Practices in Creo
2025-07-08 11:00 - 11:30 (Australia/Melbourne) | Online
Learn how to set your team up for success with standardised drawing templates and formats in Creo. This webinar covers title blocks, custom symbols, revision tables, repeat regions, and how to drive consistency across 2D and MBD-enabled drawings for efficient documentation processes.
Click below to register now:
Register

Webinar: Automating Annotations and Customising Output in Creo
2025-07-22 11:00 - 11:30 (Australia/Melbourne) | Online
Take your annotation workflow to the next level with automation tools and customisation techniques. In this session, we’ll explore annotation features driven by parameters, note automation using relations, and how to tailor output for downstream consumption—whether for inspection or manufacturing.
Click below to register now:
Register

LEAP Tech Day - Simulation (Perth)
2025-07-30 | Perth – register for times and location details, Perth, Australia
We invite you to network with your local Engineering/Simulation community and learn more about the work of local Ansys users at the LEAP Tech Day on Wednesday July 30th in Perth. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, DEM and Systems/Digital Twins.

The day will feature user presentations from local industry, industry focused use cases presented by LEAP’s Simulation experts, plus Ansys 2025 update highlights. Food and refreshments will be provided throughout the day, followed by Networking Drinks from 5 – 7pm. Speakers include:

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries in WA and network with prominent local engineers and Ansys users.

Register Below

Online Training - Getting Started with Ansys Fluent
2025-08-20 12:00 - 14:30 (Australia/Melbourne) | Online
2.5 hour online training module teaching you the basics of Ansys Fluent. For more information contact your Ansys account manager or complete this form and one of our Ansys team members will contact you to discuss your needs.

Webinar: The Future of Rendering: Discover AI-Powered KeyShot 2025.2
2025-09-17 11:00 - 11:30 (Australia/Melbourne) | Online
Join us for an exclusive webinar where we unveil the latest innovations in KeyShot 2025.2. This release introduces powerful AI-driven features designed to accelerate your workflow, enhance visual quality and help your business achieve more in less time.
Whether you’re an existing KeyShot user or returning after a few years, this session will demonstrate how these new AI capabilities in KeyShot can help you:
– Deliver faster, cleaner renders with less manual effort
– Suggest smart materials and lighting to speed up design decisions
– Give your business a competitive edge with quicker turnaround and higher-quality visuals
Don’t miss this chance to see what you’ve been missing and explore how KeyShot 2025.2 can transform the way your team designs, collaborates, and delivers results.
Click below to register now:
Register
