Webinar: Simulation Driven Design
2025-01-16 13:00 - 13:30 (Australia/Melbourne) | Online
You know that speed-to-market is crucial to a successful product launch. Learn how adding real-time simulation tools to the beginning of your development workflow will give your engineers instant feedback on their design changes and provide valuable insights on which design directions to explore next, in turn reducing rework and shortening your development cycle. Join this webinar to learn more.
Register

Australian Microwave Symposium (AMS) 2025
2025-02-10 09:00 - 2025-02-11 17:00 UTC | Griffith University, 1 Parklands Drive, Southport, QLD, 4215, Australia
LEAP is proud to be a Platinum Sponsor of the 6th Australian Microwave Symposium (AMS), which will take place on February 10-11, 2025, in Gold Coast, QLD. This biennial conference brings together the national and international microwave, millimetre-wave, and terahertz communities to meet and showcase their latest analytical, numerical, and experimental achievements in microwave and RF components, circuits, systems, antennas, and propagation. Visit the AMS website for more information and to register.

Webinar: Solving Circular References in Creo Parametric
2025-02-13 13:00 - 14:00 (Australia/Melbourne) | Online
Circular references in Creo Parametric can be a thorn in the side of even the most experienced designers, leading to frustrating errors and significantly slowing down the design process. If you’re seeking to enhance your productivity and streamline your workflows by mastering circular references, our upcoming webinar is the perfect opportunity.
What You’ll Gain:

In-Depth Understanding: Learn the ins and outs of circular references – what they are, how they occur, and the impact they have on your projects.
Efficient Investigation Techniques: Discover various methods to quickly and effectively investigate circular references within your designs, saving you time and headaches.
Practical Tools and Solutions: Get hands-on with the Reference Viewer in Creo Parametric to identify problematic references. Learn how to navigate through parents and children in your assembly, identify external references, and ultimately break dependencies with confidence.
Boosted Productivity: By eliminating circular references, you’ll significantly reduce retrieval and regeneration times, speeding up your overall design process and increasing productivity.

Why Attend?
This webinar is more than just a troubleshooting session. It’s a transformative learning experience designed to empower you with the knowledge and skills to tackle one of the most common and challenging issues in parametric modelling. Through live demonstrations and expert guidance, you’ll learn how to maintain the integrity and efficiency of your designs in Creo Parametric.
Don’t let circular references slow you down. Reserve your spot today and take a significant step towards smoother, more efficient design workflows.
Click below to register now:
Register

Webinar: Unlock the Power of Top-Down Design in Creo Parametric
2025-03-06 13:00 - 14:00 (Australia/Melbourne) | Online
Are you looking to streamline your product development process with advanced Top-Down design techniques in Creo Parametric? Whether you’re tackling complex assemblies or collaborating across teams, our upcoming webinar is designed to elevate your skills and transform your approach to design.
What You’ll Discover:

Efficient Planning Strategies: Learn how to effectively plan your assemblies with proper structure, naming conventions, and modularity requirements, ensuring a solid foundation for your designs right from the start.
Top-Down Design Execution: Gain insights into controlling your product design from the top level within Creo and discover how to distribute design tasks among groups and vendors for maximum efficiency.
Concurrent Design and Verification: Explore how Creo enables a controlled design environment, allowing for concurrent work and verification, so you can make seamless adjustments as your project evolves.
Avoiding Common Pitfalls: Understand how to create assemblies that follow your specific design intent, avoiding circular references, and ensuring a smooth, error-free design process.
Real-World Applications: See Top-Down design in action through live demonstrations in Creo Parametric, showcasing how to apply these techniques to your projects for better, faster, and more flexible designs.

Why Attend?
This webinar is more than just a tutorial – it’s a gateway to mastering Top-Down design in one of the most powerful CAD tools available. By the end of our session, you’ll be equipped with the knowledge and skills to apply these techniques directly to your work, leading to improved design quality, reduced time to market, and enhanced collaboration across your team.
Click below to register now:
Register

21st Australian International Aerospace Congress
2025-03-24 09:00 - 2025-03-26 17:00 (Australia/Melbourne) | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
Returning to Melbourne in 2025, the 21st Australian International Aerospace Congress (AIAC21) is the region’s preeminent aerospace forum. Held alongside the Australian International Airshow in Avalon, it’s a deep dive into the latest aerospace and space technologies and research over several flight-filled days. Join leap on the 24-26 March at Melbourne Convention & Exhibition Centre and Avalon – visit Engineers Australia for more information.

Avalon Australian International Airshow 2025
2025-03-25 10:00 - 2025-03-28 17:00 (Australia/Melbourne) | Avalon Airport, 80 Beach Rd, Lara, VIC, 3212, Australia
LEAP is excited to be part of the 2025 Avalon Australian International Airshow which will be held at Avalon Airport from 25th-30th of March. For more information and to register for the show, click here.
LEAP will be exhibiting at the show, with the PTC team located at the Victorian Government Pavilion in Hall 1 and the LEAP Ansys team on the Ansys booth in hall 2. If you would like to arrange a meeting with LEAP, please complete the relevant form indicating your preferred time/s and we will do our best to accommodate you.

Webinar: Understanding and Managing Design Intent with Creo Reference Viewer
2025-04-03 13:00 - 13:45 (Australia/Melbourne) | Online
Join us for a detailed webinar on leveraging Creo Reference Viewer to gain deeper insights into design intent. We’ll explore key tools like the Design Tree and Evolution Tree, helping you visualize dependencies, track design changes, and streamline your workflow. Whether you’re troubleshooting references or refining your design process, this session will provide practical strategies to enhance efficiency and clarity in your CAD models.
Click below to register now:
Register

Australian Manufacturing Week
2025-05-06 10:00 - 2025-05-09 16:00 (Australia/Sydney) | Melbourne Convention & Exhibition Centre, 1 Convention Centre Pl, Melbourne, Victoria, 3006, Australia
LEAP is exhibiting at Australian Manufacturing Week from May 6th to 9th at the Melbourne Convention & Exhibition Centre in Melbourne. Find us at booth MS460 to meet the LEAP team and discuss all your engineering and product development software needs. Register to attend here.
If you would like to arrange a time to meet with the LEAP team to discuss your needs, please complete the form below.

SouthMACH 2025
2025-05-28 08:00 - 2025-05-29 17:00 (Pacific/Auckland) | Christchurch Arena, 55 Jack Hinton Dr, Addington, Christchurch, 8024, New Zealand
Elevate your manufacturing and engineering business with products, trends and knowledge at SouthMACH
SouthMACH is the South Island’s leading industry trade event, spotlighting the latest developments in manufacturing, engineering and technology. Access big developments in new brands and product launches, essential education and industry insights, crucial networking, and serious deal-making. It’s all here waiting to be experienced.
Register to attend today.
If you would like to arrange a time to meet with the LEAP team to discuss your needs, please complete the form below.

3-Day Creo Fundamentals Training (Perth)
2025-06-17 09:00 - 2025-06-19 17:00 (Australia/Perth) | LEAP Perth Office, Suite 6, 5 Brodie-Hall Drive, Bentley, WA, 6102, Australia
In this course, you will gain a baseline knowledge of Creo’s core capabilities. You will learn the Creo Design Process that is used to create part and assembly models as well as document and analyse them. You will then take a deeper dive into each of the Creo Design Process sections.
Pay for this course online by credit card, or email info@leapaust.com.au for alternative payment options.

Webinar: Drawing Formats, Templates, and Best Practices in Creo
2025-07-08 11:00 - 11:30 (Australia/Melbourne) | Online
Learn how to set your team up for success with standardised drawing templates and formats in Creo. This webinar covers title blocks, custom symbols, revision tables, repeat regions, and how to drive consistency across 2D and MBD-enabled drawings for efficient documentation processes.
Click below to register now:
Register

Webinar: Automating Annotations and Customising Output in Creo
2025-07-22 11:00 - 11:30 (Australia/Melbourne) | Online
Take your annotation workflow to the next level with automation tools and customisation techniques. In this session, we’ll explore annotation features driven by parameters, note automation using relations, and how to tailor output for downstream consumption—whether for inspection or manufacturing.
Click below to register now:
Register

LEAP Tech Day - Simulation (Perth)
2025-07-30 | Perth – register for times and location details, Perth, Australia
We invite you to network with your local Engineering/Simulation community and learn more about the work of local Ansys users at the LEAP Tech Day on Wednesday July 30th in Perth. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, DEM and Systems/Digital Twins.

The day will feature user presentations from local industry, industry focused use cases presented by LEAP’s Simulation experts, plus Ansys 2025 update highlights. Food and refreshments will be provided throughout the day, followed by Networking Drinks from 5 – 7pm. Speakers include:

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries in WA and network with prominent local engineers and Ansys users.

Register Below

Online Training - Getting Started with Ansys Fluent
2025-08-20 12:00 - 14:30 (Australia/Melbourne) | Online
2.5 hour online training module teaching you the basics of Ansys Fluent. For more information contact your Ansys account manager or complete this form and one of our Ansys team members will contact you to discuss your needs.

Webinar: The Future of Rendering: Discover AI-Powered KeyShot 2025.2
2025-09-17 11:00 - 11:30 (Australia/Melbourne) | Online
Join us for an exclusive webinar where we unveil the latest innovations in KeyShot 2025.2. This release introduces powerful AI-driven features designed to accelerate your workflow, enhance visual quality and help your business achieve more in less time.
Whether you’re an existing KeyShot user or returning after a few years, this session will demonstrate how these new AI capabilities in KeyShot can help you:
– Deliver faster, cleaner renders with less manual effort
– Suggest smart materials and lighting to speed up design decisions
– Give your business a competitive edge with quicker turnaround and higher-quality visuals
Don’t miss this chance to see what you’ve been missing and explore how KeyShot 2025.2 can transform the way your team designs, collaborates, and delivers results.
Click below to register now:
Register

Webinar: Materials Calibration for DEM simulation of bulk solids
2025-09-18 13:00 - 13:30 (Australia/Melbourne) | Online
Discrete Element Method (DEM) simulations are an incredibly useful virtual tool to predict the behaviour of a bulk solid. However, it is necessary to calibrate and experimentally validate your simulations with a set of material tests that represent a comprehensive set of flow regimes. In addition, the abrasive wear of equipment can be predicted when the model is calibrated based on experimentally obtained wear rates. Join Dr. Daniel Grasser from TUNRA in a joint webinar, hosted by LEAP Australia, to discuss recommendations and best practices on materials calibration for DEM simulation of bulk solids.
*Please note that by registering for this webinar your contact details will be shared with TUNRA Bulk Solids.
Click below to register now:
Register

Webinar: Do More With Creo - Creo Simulate Elite
2025-09-23 11:00 - 11:30 (Australia/Melbourne) | Online
Did you know the latest Creo subscription bundles include Creo Simulate Elite? Creo Simulate Elite features robust structural analysis tools that allow you to evaluate product integrity inside the design phase and within the familiar Creo environment. Join LEAP’s PTC team for this free webinar to learn how you can leverage the FEA tools included with your Creo subscription and receive access to the self-paced learning training content after the webinar to help get you up and running with Creo Simulate Elite fast!
Click below to register now:
Register

Creo 12 Launch Webinar – Part 1: Usability and Productivity Enhancements
2025-10-02 13:00 - 14:00 (Australia/Melbourne) | Online
Charting new waters in 3D CAD with Creo 12
Creo helps manufacturers get the most value from their CAD system, with integrated design, simulation, and manufacturing capabilities. Creo 12 provides industry-leading composite capabilities, expanded Model-Based Definition, improved real-time simulation, and streamlined manufacturing workflows.
Over this two-part webinar series the LEAP PTC team will show you the top enhancements in Creo 12 and demonstrate how Creo 12 will help you deliver your best designs in less time. Complete the form below to register.
Part 1 will cover the core usability and productivity enhancements applicable to all users in Creo 12, including:

User Interface/User Experience
Sketcher
Core Modelling
Sheet Metal
Surfacing
Assembly Design
Data Exchange

Click below to register now:
Register

Creo 12 Launch – Part 2: Update on Creo’s Extended Capabilities
2025-10-09 13:00 - 13:30 (Australia/Melbourne) | Online
Charting new waters in 3D CAD with Creo 12
Creo helps manufacturers get the most value from their CAD system, with integrated design, simulation, and manufacturing capabilities. Creo 12 provides industry-leading composite capabilities, expanded Model-Based Definition, improved real-time simulation, and streamlined manufacturing workflows.
Over this two-part webinar series the LEAP PTC team will show you the top enhancements in Creo 12 and demonstrate how Creo 12 will help you deliver your best designs in less time. Complete the form below to register.
The second webinar in the series will take a deeper dive into the powerful capabilities offered in Creo 12 extensions, including:

Design for Composites
Design for Electrification
Simulation Driven Design
Model-Based Definition
Design for Manufacturing

Click below to register now:
Register

LEAP Tech Day - Simulation (Melbourne)
2025-11-12 09:30 - 17:00 (Australia/Melbourne) | Holmesglen Conference Centre, - Register for full location and agenda Chadstone, Vic, Chadstone, VIC, Australia
Please note that this event is very close to reaching capacity. If you wish to attend you are welcome to complete the form below and we will respond to confirm your registration. We invite you to network with your local Engineering/Simulation community and learn more about the work of local Ansys users at the LEAP Tech Day on Wednesday November 12th in Melbourne. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, DEM and Systems/Digital Twins.

The day will feature user presentations from local industry, industry focused use cases presented by LEAP’s Simulation experts, plus Ansys 2025 update highlights. Food and refreshments will be provided throughout the day, followed by Networking Drinks from 4:30 – 6:30pm.

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries in Victoria and network with prominent local engineers and Ansys users.

Register Below

3-Day Creo Fundamentals Training (Sydney)
2025-11-18 09:00 - 2025-11-20 17:00 (Australia/Sydney) | LEAP Sydney Office, Suite 20, 74-78 The Corso, Manly, NSW, 2095, Australia

LEAP Tech Day - Simulation (Adelaide)
2025-11-27 | Adelaide – register for times and location details, Australia
Please note that this event is very close to reaching capacity. If you wish to attend you are welcome to complete the form below and we will respond to confirm your registration. We invite you to network with your local Engineering/Simulation community and learn more about the work of local Ansys users at the LEAP Tech Day on Thursday November 27th in Adelaide. Prominent local engineers will be describing some of their recent work using Ansys simulation tools across Fluids, Structures, Optics, Electromagnetics, DEM and Systems/Digital Twins.

The day will feature user presentations from local industry, industry focused use cases presented by LEAP’s Simulation experts, plus Ansys 2025 update highlights. Food and refreshments will be provided throughout the day, followed by Networking Drinks from 4:30 – 6:30pm.

Don’t miss this opportunity to hear first-hand how Ansys is being used across different industries in South Australia and network with prominent local engineers and Ansys users.

Register Below

Webinar: Improving CAE Workflows with Ansys OptiSLang
2025-12-04 13:00 - 13:30 (Australia/Melbourne) | Online
Join us for a deeper-dive into Ansys OptiSLang, exploring the ways in which simulation engineers can overcome their current challenges due to manual setup, fragmented toolchains, limited design exploration and constraints due to multi-objective trade-offs.
Learn how Ansys OptiSLang is built to change the paradigm from “simulate to check” to “simulate to discover”. OptiSLang integrates directly with CAD, Ansys, and other simulation tools to automate the processes of parameter variation, Design of Experiments (DOE), sensitivity analysis, and optimisation. Instead of manually running hundreds of cases, engineers now only need to define parameters and objectives once. OptiSLang then drives the simulations, interprets the results, and guides users toward the most influential design factors and best-performing variants.
Join LEAP’s expert team as we take you through how OptiSLang standardises and automates your Digital Engineering workflows to incorporate process automation, sensitivity and robustness analysis, optimisation and trade-off exploration, and provide a basis for data-driven decision making, with insights derived from statistical analysis and visualisation of the entire design space.
Register here

Online Training - Automation in Ansys Mechanical (Part 1)
2025-12-10 10:00 - 12:30 (Australia/Melbourne) | Online
2 hour online training module teaching you the basics of Automation in Ansys Mechanical (part 1 of 2). For more information contact your Ansys account manager or complete this form and one of our Ansys team members will contact you to discuss your needs.

Online Training - Automation in Ansys Mechanical (Part 2)
2025-12-11 10:00 - 12:30 (Australia/Melbourne) | Online
2 hour online training module teaching you the basics of Automation in Ansys Mechanical (part 2 of 2). For more information contact your Ansys account manager or complete this form and one of our Ansys team members will contact you to discuss your needs.

Webinar: Product Data Management (PDM) with Windchill
2026-02-11 13:00 - 13:45 (Australia/Melbourne) | Online
Join the LEAP PTC team for our upcoming webinar series on the Intelligent Product Lifecycle to see the latest in PDM, PLM and ALM, and to also learn how companies are harnessing product data in the factory and beyond to create higher quality products faster and more efficiently.
Product Data Management (PDM) with Windchill
Topics covered:
• CAD data management
• Document management
• Visualisation
• Workflows
Register

Webinar: Beyond PDM - Product Lifecycle Management (PLM) with Windchill
2026-02-25 13:00 - 13:45 (Australia/Melbourne) | Online
Join the LEAP PTC team for our upcoming webinar series on the Intelligent Product Lifecycle to see the latest in PDM, PLM and ALM, and to also learn how companies are harnessing product data in the factory and beyond to create higher quality products faster and more efficiently.
Beyond PDM: Product Lifecycle Management (PLM) with Windchill
Topics covered:
• Part and BOM Management
• Change Management
• Modular Platform Design
• Project Planning
Register

Digital Mission Engineering powered by Ansys - 1-Day Workshop @ RMIT
2026-02-26 09:30 - 18:00 (Australia/Melbourne) | Building 13 (Emily McPherson) – RMIT University, Building 13 (Emily McPherson) - RMIT University, Melbourne, VIC, 3000, Australia
LEAP Australia has partnered with RMIT to deliver a 1-day, in-person workshop on Digital Mission Engineering powered by Ansys. Join us in Melbourne on February 26th for this introduction to Mission Engineering through a series of hands-on, practical, and industry-relevant workshops. The day will conclude with a casual social event providing the opportunity to network with industry peers.
Learn how to model operations, assets, payloads and capabilities across air, land, sea and space domains, using cutting edge modelling and simulation tools. The interactive workshops will use Ansys System Toolkit (STK) to capture, analyse, and visualise complex systems of systems in their operational environments.
Attendance is free but registration is essential and places are limited – click through for more information and to register today.

Webinar: Extending PLM to Manufacturing with Windchill
2026-03-11 13:00 - 13:45 (Australia/Melbourne) | Online
Join the LEAP PTC team for our upcoming webinar series on the Intelligent Product Lifecycle to see the latest in PDM, PLM and ALM, and to also learn how companies are harnessing product data in the factory and beyond to create higher quality products faster and more efficiently.
Extending PLM to Manufacturing with Windchill
Topics covered:
• BOM Transformation and Reconciliation
• Work Instructions
• Supplier Management
• Quality Management
Register

3-Day Creo Fundamentals Training (Melbourne)
2026-03-17 09:00 - 2026-03-19 17:00 (Australia/Melbourne) | LEAP Melbourne Office, Suite 6, 750 Blackburn Rd, Clayton North, Victoria, 3168, Australia
In this course, you will gain a baseline knowledge of Creo’s core capabilities. You will learn the Creo Design Process that is used to create part and assembly models as well as document and analyse them. You will then take a deeper dive into each of the Creo Design Process sections.
Complete this form to request more information or a quote for this training course.
Pay for this course online by credit card, or email info@leapaust.com.au for alternative payment options.
